Leading Edge Attachments, Inc.

The Multi-Ripper® Talon Bucket

US Patent Number 7,322,133
Canadian Patent Number 2,521,725
Mexican Patent Number 272,981
Patents Granted and Pending in many other countries

Multi-Ripper Talon Bucket

 
LEA Multi-Ripper Talon BucketLEA Multi-Ripper Talon BucketLEA Multi-Ripper Talon Bucket

email sales@leattach.com for more information
or call us to discuss your special application 508-829-4855



 
LEA Multi-Ripper Talon Bucket
LEA Multi-Ripper Talon Bucket
LEA Multi-Ripper Talon Bucket
LEA Multi-Ripper Talon Bucket
LEA Multi-Ripper Talon Bucket
LEA Multi-Ripper Talon Bucket

Sharc Technology

Leading Edge Attachments, Inc.® now offers the patented Multi-Ripper® TalonTM Bucket as the new addition to the Multi-Ripper SHARC Product line. LEA Multi-Ripper Products have shown to replace hammers, blasting and rock trenchers, for a fraction of the cost. Designed mainly for utility pipeline contractors, the new Multi-Ripper Talon Bucket works on the same principal as the award winning Multi-Ripper Bucket, except the bucket is very narrow, and the leading edges have been redesigned so that the center rib can be eliminated, thus improving capacity fill and dumping for a narrow bucket. The performance of this style bucket greatly exceeds all other designs of rock bucket ripper combinations and has saved hundreds of thousands of dollars by avoiding the use of rock trenchers, hammers and blasting. The Multi-Ripper Talon Bucket is the newest addition to the highest quality and most productive rock ripper bucket combinations available on the market.

 

The Multi-Ripper Talon Bucket utilizes the worldwide patented SHARCTM (SHanks on an ARC) Technology, meaning that the bucket functions similarly to that of a trencher except it uses the hydraulic excavator rolling action to rip. The staggered ripper teeth fracture the substrate in sequential order, so that the rolling of the Multi-Ripper Talon Bucket, by extending the bucket cylinder, always provides maximum breakout force applied sequentially to each tooth, one tooth at a time. The results are flat ripped sides and bottom surfaces replacing rock trenchers for a tremendous cost savings. LEA, Inc. Products will be shown in Las Vegas Conexpo 2014 in Central 1 Hall Booth 31040.

 

  • Patented staggered shank on an arc design allows the excavator operator to dig through rock, coral or frozen ground.
  • Rips the sides and bottom of the trench flat with no depth limitations.
  • Delivers close to 8 times the force of a standard excavator bucket.
  • Is 4 times faster than using a hydraulic hammer.
  • Outperforms any other style rock bucket 2 to one.
  • Heavy leading edges allow for narrow width with no center rip and conventional tooth adapters.
  • Can be used in place of a rock trencher.
  • Can be used to rip rock instead of blasting.
  • Supplied with powerful MTG KingMet Systems teeth.
Available for any excavator above 6,000 pounds.

How do I benefit?

The Multi-Ripper Talon Bucket Multi-plies Your Money!

It lets you do what you couldn't do before!

It increases the effective size of your machine!

How does it do this?

These products rip rock up to 4 times faster than a hammer. They rip 10 times faster than a single pointed ripper. They greatly exceed all other designs of frost rock, or ripper buckets on the market. They rip to all depths leaving relatively flat bottom and side walls in the trench. The staggered shanks on an arc hit one at a time allowing the maximum breakout to be applied to each tooth. The tooth force is about 8 times that of a standard 5 tooth bucket because the shanks are short. Also, the shanks are the same distance from the stick pivot, so the shanks rip a relatively flat bottom.

Why should I believe that it works?

These products have been proven over the past 13 years and have been granted leters patents in the US and in many countries throughout the world. These designs won several design awards. Many customers have claimed this is the best attachment I've ever bought. See the endorsements

email sales@leattach.com for more information
or call us to discuss your special application 508-829-4855



Hi-Cap Multi-Ripper Bucket  Force Comparison

Breaks rock and frost 4 times faster than a hammer,
at a fracton of the cost.

Rips the sides and bottomof the trench flat
with no depth limitation.

Available for any excavator heavier than 6,000 pounds.
(including mini-excavators and backhoes)

 
Multi-Ripper SHARC Operating Procedure



Please know that adding extra plates or adding hard-facing is not necessary, and not recommended. Hard-facing can actually cause damage to the HARDOX material by inducing tiny cracks in the material, and will thus void our warranty. If any welding is required or desired, please contact LEA, Inc. Engineering for the special HARDOX welding procedure.

Multi-Ripper Products are available with MTG Systems Teeth and Adapters.
KingMet LogoKingMet Teeth
email sales@leattach.com for more information
or call us to discuss your special application 508-829-4855




Follow Us On YouTube
Credit cards
Call direct: 508-829-4855  Fax: 508-829-4822   email: sales@leattach.com 

Website: www.digrock.com

Leading Edge Attachments, Inc.
Copyright 2002-2016; Leading Edge Attachments, Inc. All Rights Reserved
Revised: December 5th, 2016